Ricoh P C301W - Machine Operation with Toner Level Alert; Estimated Toner Yield for each Print Condition

6.Troubleshooting
246
Error code
Description
FFF0
For AIO in use, cannot be calculated.
FFF1
Number of machine prints is “0”, cannot be calculated.
FFF2
Number of BW/Color prints for AIO in use is "0", cannot be calculated.
FFF3
Calculation for Bk rate exceeds upper or lower limit.
FFF4
Division by "0" in Print rate, cannot be calculated.
FFF5
Division by "0" in Main printing P/J, cannot be calculated.
Machine Operation with Toner Level Alert
The toner levels and descriptions are listed in the following table.
Job
Toner level
Machine operation
Note
K
CMY
*1
Color printing
Not End
Not End
Printing OK
Not End
End
Cannot print
End
Not End
Cannot print
End
End
Cannot print
BW printing
Not End
Not End
Printing OK
Not End
End
Printing OK
End
Not End
Cannot print
End
End
Cannot print
Fax TX
Not End
Not End
TX OK
Not End
End
TX OK
End
Not End
Cannot TX
This is for the TX result report output.
End
End
Cannot TX
Fax RX
Not End
Not End
RX OK
Not End
End
RX OK
End
Not End
Memory RX OK
End
End
Memory RX OK
*1: Color printing is not possible if even one color is at toner end.
Estimated Toner Yield for Each Print Condition
The print yield for any toner is affected by variables such as paper type, paper size, contents of the print
job, and ambient conditions. Depending on machine usage, the replacement alert can appear earlier.
Reference values (For high yield AIO)
Print rate
Print condition (P/J)
Number of sheets printed (K sheets)
10%
1
2.3
2
2.9