Ricoh P C301W - Page 256

6.Troubleshooting
244
The information is display from the top in the order K > M > C > Y. 15 items can be checked for
each color.
Parameter Details
No.
Item
Data type
Range/Default/Step
Details
Comments
1
Bk rate
2byte(HEX)
0.0 to 100.0 / 0 /
0.1%/step
Displays BW print
rate.
If AIO in use is
installed, the
value is incorrect.
For more
information on
error codes, refer
to the following
Note.
2
Print rate
(estimated value)
2byte(HEX)
0.00 to 100.00 / 0 /
0.01%/step
Displays print
rate.
3
Main printing P/J
(estimated value)
2byte(HEX)
1.0 to 6553.5 / 1.0 /
0.1P/J/step
Display main print
P/J.
4
Sleeve
recovery/Power
On times
2byte(HEX)
-
Normally displays
“0000”.
Not calculated
5
Process control
failure count
(upper 6 bits)
2byte(HEX)
0 to 630 / 0 / 10
times/step
Displays count for
process control
failures.
Monochrome
process control
counts only K,
color process
control counts all
colors.
Number of
process control
executions (lower
10 bits)
0 to 1023 / 0 / 1
time/step
Displays the
number of
process control
executions.
6
MUSIC failure
count (upper 6
bits)
2byte(HEX)
0 to 630 / 0 / 10
times/step
Displays count for
MUSIC failures.
MUSIC execution
0 to 1023 / 0 / 1
Displays count for