Ricoh P C301W - Page 317

4.Setting for PaaS (Only for CHN)
16
Registration Configurations List:
Item
Description
Contract ID
Enter the customer Contract ID.
Authentication Key
Enter the customer Authentication Key.
PaaS URL
China: rpaasdev.online.tj.cn
If noPaaS URL is specified, enter the PaaS URL above.
6. If using a proxy server, enter the proxy information.
Proxy Function List:
Item
Description
Enable Proxy
Function
Check this box to enable the proxy server.
Proxy URL
Set the proxy server address.
The characters that can be input are: 0-9, A-Z, a-z.
Proxy Port Number
Enter the proxy server port number.
The range is 1-65535.
Authorization
The authorization method of linking to the proxy server.
The options are:
-None
-Basic
-Digest
The default value is “None”.
When “Basic” or “Digest” is selected, the User Name and Password can be
edited and should not be left blank.
When “None” is selected, the User Name and Password are read only.
User Name
The account connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
Password
The password for the user name connecting to the proxy server.
Use ASCII characters only. The max. length is 32.
7. After entering the information, click [OK].
8. If the message “Operation Successful” appears, PaaS registration is complete. For other
messages, check the following list table: