Rohde & Schwarz ESW Series - Page 206

Common Analysis and Display Functions
R&S
®
ESW
206User Manual 1177.6298.02 ─ 08
1 2 76 84 53
Figure 11-3: Screen layout of the spectrogram result display
1 = Spectrum result display
2 = Spectrogram result display
3 = Marker list
4 = Marker
5 = Delta marker
6 = Color map
7 = Timestamp / frame number
8 = Current frame indicator
For more information about spectrogram configuration, see Chapter 11.3.6, "Spectro-
gram Settings", on page 215.
Remote commands:
Activating and configuring spectrograms:
Chapter 15.7.3.5, "Spectrogram Configuration", on page 531
Storing results:
MMEMory:STORe<n>:SPECtrogram on page 617
● Time Frames......................................................................................................... 206
● Markers in the Spectrogram..................................................................................207
● Color Maps............................................................................................................208
Time Frames
The time information in the spectrogram is displayed vertically, along the y-axis. Each
line (or trace) of the y-axis represents one or more captured measurement and is
called a time frame or simply "frame". As with standard spectrum traces, several mea-
sured values are combined in one measurement point using the selected detector.
Trace Configuration