Rohde & Schwarz ESW Series - Page 283

Data Management
R&S
®
ESW
283User Manual 1177.6298.02 ─ 08
Zoom In / Zoom Out....................................................................................................283
Fit Page.......................................................................................................................283
Zoom 1:1.....................................................................................................................283
Page Up / Page Down.................................................................................................283
Print.............................................................................................................................283
Zoom In / Zoom Out
Zooms into (enlarges) or zooms out of (decreases) the preview display. Note that the
zoom functions affect only the preview, not the printout itself.
Fit Page
Adapts the preview display zoom factor so that one complete page is visible as large
as possible in the available display space. Note that the zoom functions affect only the
preview, not the printout itself.
Zoom 1:1
Displays the printout in its original size, as it will be printed.
Page Up / Page Down
Depending on the selected contents (see Chapter 12.6.1.1, "Print Content Settings",
on page 280), the printout can consist of multiple pages. Use these functions to scroll
within the preview to see the individual pages.
Print
Starts to print or store the selected screen contents to a file (see Chapter 12.6.1.1,
"Print Content Settings", on page 280).
Whether the output is sent to the printer or stored in a file or the clipboard depends on
the selected printing device and the printing device settings (see Chapter 12.6.1.3,
"Printer Settings", on page 283).
If the output is stored to a file, a file selection dialog box is opened to select the file-
name and location. The default path is C:\R_S\Instr\User.
Remote command:
HCOPy[:IMMediate<1|2>] on page 598
HCOPy[:IMMediate<1|2>]:NEXT on page 598
12.6.1.3 Printer Settings
Access: "Print" > "Print Config" > "Printer" tab
Creating Screenshots of Current Measurement Results and Settings