Rohde & Schwarz ESW Series - Page 542

Remote Commands in the Receiver Application
R&S
®
ESW
542User Manual 1177.6298.02 ─ 08
Suffix:
<n>
.
Marker
<m> irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST: ON
Example: //Couple scan range settings to the marker frequency
CALC:MARK:SCO ON
Manual operation: See "Settings Coupled" on page 234
DISPlay[:WINDow<n>]:MINFo[:STATe]
<DisplayMode>
This command turns the marker information in all diagrams on and off.
Suffix:
<n>
.
irrelevant
Parameters:
<DisplayMode> ON | 1
Displays the marker information in the diagrams.
OFF | 0
Hides the marker information in the diagrams.
*RST: 1
Example:
DISP:MINF OFF
Hides the marker information.
Manual operation: See "Marker Info" on page 234
DISPlay[:WINDow<n>]:MTABle <DisplayMode>
This command turns the marker table on and off.
Suffix:
<n>
.
irrelevant
Parameters:
<DisplayMode> ON | 1
Turns on the marker table.
OFF | 0
Turns off the marker table.
*RST: AUTO
Example:
DISP:MTAB ON
Activates the marker table.
Manual operation: See "Marker Table Display" on page 233
Analysis