Rohde & Schwarz ESW Series - Page 599

Remote Commands in the Receiver Application
R&S
®
ESW
599User Manual 1177.6298.02 ─ 08
HCOPy:ITEM:WINDow<1|2>:TEXT <arg0>
This command defines a comment to be added to the printout.
Suffix:
<1|2>
.
1|2
Parameters:
<arg0> String containing the comment.
Manual operation: See "Comment" on page 281
HCOPy:PAGE:COUNt:STATe <arg0>
This command includes or excludes the page number for printouts consisting of multi-
ple pages (HCOPy:CONTent on page 596).
Parameters:
<arg0> 1 | 0 | ON | OFF
1 | ON
The page number is printed.
0 | OFF
The page number is not printed.
*RST: 1
Example:
HCOP:PAGE:COUN:STAT ON
Manual operation: See "Print Page Count" on page 281
HCOPy:PAGE:MARGin<1|2>:BOTTom <arg0>
This command defines the margin at the bottom of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<1|2>:UNIT on page 600.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See "Margins" on page 287
HCOPy:PAGE:MARGin<1|2>:LEFT <arg0>
This command defines the margin at the left side of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<1|2>:UNIT on page 600.
Data Management