Rohde & Schwarz ESW Series - Page 615

Remote Commands in the Receiver Application
R&S
®
ESW
615User Manual 1177.6298.02 ─ 08
Manual operation: See "General properties of the test report document"
on page 294
HCOPy:TREPort:PCOLors[:STATe] <State>
This command turns the use of printer friendly colors on and off.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
HCOP:TREP:PCOL ON
Creates the test report with printer friendly colors.
Manual operation: See "General properties of the test report document"
on page 294
HCOPy:TREPort:TDSTamp[:STATe]
<State>
This command includes or excludes date and time from the test report.
Parameters:
<State> ON | OFF
*RST: ON
Example:
HCOP:TREP:TDST OFF
Does not show any time or date information in the test report.
Manual operation: See "General properties of the test report document"
on page 294
HCOPy:TREPort:TEST:REMove <Dataset>
This command deletes one of the datasets that are currently part of a test report.
Note that the command only deletes datasets as a whole (= complete chapters). Delet-
ing individual items of a dataset is not possible.
Set # 1
Set # 2
Subset
Subset
Data Management