Rohde & Schwarz ESW Series - Page 644

Remote Commands in the Receiver Application
R&S
®
ESW
644User Manual 1177.6298.02 ─ 08
INPut:TERMinator <State>
This command turns the RF input on and off.
Note that the command works regardless of the state of DISPlay:ITERm[:STATe].
Only for usage via the user interface is it necessary to turn on the display of the toolbar
icon.
Note: This setting is maintained even after using the [PRESET] function.
Parameters:
<State> ON | OFF
ON
Turns on the RF input.
OFF
Turns off the RF input.
*RST: ON
Example:
INP:TERM ON
Cuts off the RF input.
Manual operation: See "Disconnect RF" on page 310
SYSTem:DISPlay:FPANel[:STATe] <State>
This command includes or excludes the front panel keys when working with the remote
desktop.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Manual operation: See "Front Panel" on page 308
See "Mini Front Panel" on page 309
15.9.5.2 Colors and Schemes
Commands to select colors and schemes described elsewhere.
●
HCOPy:CMAP<it>:DEFault<ci> on page 594
●
HCOPy:CMAP<it>:HSL on page 595
●
HCOPy:CMAP<it>:PDEFined on page 595
DISPlay:CMAP<it>:DEFault<ci>...................................................................................... 644
DISPlay:CMAP<it>:HSL..................................................................................................645
DISPlay:CMAP<it>:PDEFined......................................................................................... 645
DISPlay:THEMe:CATalog?..............................................................................................646
DISPlay:THEMe:SELect................................................................................................. 646
DISPlay:CMAP<it>:DEFault<ci>
This command resets the color scheme for the display. The query returns the default
color scheme.
General Instrument Setup