Rohde & Schwarz ESW Series - Page 654

Remote Commands in the Receiver Application
R&S
®
ESW
654User Manual 1177.6298.02 ─ 08
Example:
INST:COUP:USER:CHAN:LIST?
would return, e.g.:
'SPEC1','AD1','REC1','REC2','All Spectrum','All
Channels','All Receiver','All Analog Demod'
Usage: Query only
Manual operation: See "Selecting the channels to synchronize" on page 351
INSTrument:COUPle:USER<j>:ELEMent:LIST? [<ChannelName>, <Parameter>]
This command queries parameters that can be synchronized.
Suffix:
<j>
.
irrelevant
Query parameters:
<ChannelName> Optional SCPI parameter.
String containing the name of a measurement channel.
<Parameter> Optional SCPI parameter.
String containing the name of a parameter that you can syn-
chronize.
Return values:
<Synchronizable
Parameter>
Case 1 (command without SCPI parameters):
All parameters that can be synchronized (as a comma-separa-
ted list of strings).
Case 2 (command with one SCPI parameter):
Parameters that can be synchronized for the selected <Channel-
Name> (as a comma-separated list of strings).
Case 3 (command with two SCPI parameters):
Parameters that can be synchronized with the parameter
selected with <Parameter> (as a comma-separated list of
strings).
(If the <Parameter> cannot be synchronized in the selected
<ChannelName>, the command returns nothing.)
General Instrument Setup