Remote Commands in the Receiver Application
R&S
®
ESW
656User Manual 1177.6298.02 ─ 08
After the new mechanism has been created, the command returns the index number of
the mechanism.
Suffix:
<j>
.
irrelevant
Parameters:
<ChannelName> String containing the name of a measurement channel or chan-
nel type.
<Name>
To synchronize two specific measurement channels.
'All Receiver'
To synchronize all receiver channels.
'All Spectrum'
To synchronize all spectrum channels.
'All IQ Analyzer'
To synchronize all I/Q analyzer channels.
'All Analog Demod'
To synchronize all analog demodulation channels.
'All Channels
To synchronize all channels, regardless of their type.
<Window>
String containing the name of a measurement window.
(In most cases, this is 'All Windows', because synchronizing
measurement windows is only possible in the Analog Demodula-
tion application.)
<Name>
To synchronize a specific window.
'All Windows'
To synchronize all measurement windows.
<Parameter> String containing the name of a synchronizable parameter.
<ChannelName> String containing the name of a measurement channel or chan-
nel type.
The second channel name is only necessary for synchronization
between two specific channels. When you synchronize all chan-
nels of the same type or all channels, the string has to be empty.
<Window> String containing the name of a measurement window.
The second window name is only necessary for synchronization
between two specific channels. When you synchronize all chan-
nels of the same type or all channels, the string has to be empty.
<Parameter> String containing the name of a synchronizable parameter.
The second parameter name is only necessary for synchroniza-
tion between two specific channels. When you synchronize all
channels of the same type or all channels, the string has to be
empty.
<Direction> Optional SCPI parameter.
General Instrument Setup
To Next Page
Loading...
