Improving Level Performance
R&S
®
SMA100B
224User Manual 1178.3834.02 ─ 05
Figure 7-5: Power analysis context-sensitive menu
In the context-sensitive menu you can access:
●
"Start Continuous/Stop (Power Analysis)": Triggers/stops the power analysis mea-
surement
●
"Next Window (Hardkey)": Switches between the measurement views that are
enabled in the following order:
– "Standard View"
– "Marker View"
– "Pulse Data View"
– "Full Screen"
At least one viewing mode has to be selected. For details on the different view
modes, see "Next Window List" on page 250.
●
"Configure...": opens a dialog for configuring the power analysis measurement. See
Chapter 7.4.4.7, "Configure Settings", on page 230.
●
"Trace/Markers...": opens a dialog for configuring the traces/marker. See Chap-
ter 7.4.4.6, "NRP Traces Settings", on page 226.
●
"Trace/Pulse Data Notifications/Trigger.... ": in the time mode, opens a dialog to
configure the pulse data measurements. See "Configure Pulse Data" on page 241.
●
"Save...(Power Analysis)": opens a dialog to save a hardcopy of the measurement.
See Chapter 7.4.4.8, "Creating Screenshots of Power Analysis Settings ",
on page 254.
Measurement window
Diagram indicating the measurement results graghically, including configured markers,
functions, etc.
Using Power Sensors
To Next Page
Loading...
