Remote Control Commands
R&S
®
SMA100B
637User Manual 1178.3834.02 ─ 05
Return values:
<Upper> float
Increment: 0.01
Default unit: dBm
Example:
SOURce1:POWer:RANGe:UPPer?
// -15
SOURce1:POWer:RANGe:LOW?
// -50
Usage: Query only
Manual operation: See " Level Range " on page 70
[:SOURce]:POWer:WIGNore <State>
Ignores level range warnings.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: n.a. (factory preset: 0)
Example:
SOURce:POWer:WIGNore 1
13.16.12 SOURce:ROSCillator Subsystem
The SOURce:ROSCillator subsystem contains the commands for setting the exter-
nal and internal reference frequency.
The commands of this subsystem are not affected by an instrument reset (*RST
on page 409).
SOURce Subsystem
To Next Page
Loading...
