File and Data Management
R&S
®
SMA100B
297User Manual 1178.3834.02 ─ 05
You access this generic standard function each time you perform one of the following:
●
Save or load (settings) files
●
Define a folder in that these files are saved
●
Navigate through the file system.
The dialog name changes depending on the context. The provided functions are self-
explanatory and similar.
Use the settings for example as follows:
●
To navigate through the file system, use the directory tree.
●
To create a file, load and save files, use the dedicated functions "New", "Select",
Save, and Recent files.
●
To access the general data list editor, use the"Edit" button
(see also Chapter 6.7, "List Editor", on page 188).
●
To perform standard file management functions, like create directories, move, copy,
delete files and/or directories, use the standard "File Manager" function (see Chap-
ter 10.8, "Using the File Manager", on page 298).
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 418
:MMEMory:CATalog? on page 417
[:SOURce]:CORRection:CSET:CATalog? on page 587
Functions for handling of data lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:LIST:SELect on page 622
[:SOURce<hw>]:PULM:TRAin:SELect on page 537
[:SOURce<hw>]:CORRection:CSET[:SELect] on page 586
"New"
Creates file with the specified "Filename".
To confirm, select "OK"; use "Cancel" to undo the operation.
To edit the file content, select "File Select > Edit".
"Edit"
Accesses the "Data List Editor" and loads the selected file for editing
Recent files
Displays the files last used.
File Manager
Accesses the "File Manager" dialog, see Chapter 10.8, "Using the File Manager",
on page 298.
10.6 Exporting Remote Command Lists
To set specific instrument settings or perform tasks automatically, you can create
scripts that contain the settings in the form of remote control command sequences.
Exporting Remote Command Lists
To Next Page
Loading...
