Rohde & Schwarz SMAB-B92 - Accessing the NRP Power Analysis Functionality

Improving Level Performance
R&S
®
SMA100B
223User Manual 1178.3834.02 ─ 05
7.4.4.2 Accessing the NRP Power Analysis Functionality
Access:
► Select "Clk Syn/Power Sens" > "NRP Power Analysis".
Figure 7-4: Power analysis window
1 = Buttons for accessing the "NRP Power Viewer" settings
2 = Power analysis diagram window
3 = Buttons for accessing the traces/marker dialogs
4 = Buttons for accessing the configuration dialogs with measurement and sensor parameters
5 = "Start" button to trigger/stop the measurement
The start screen of the NRP analysis contains the measurement diagram and
labelled buttons/softkeys indicating connected power sensors. These button and a
configuration button provide access to the dialogs for setting up the measurement
and sensor parameters, for configuring the diagram and for the trace display. You
can start or stop your measurement directly.
Context-sensitive menu
A context sensitive menu also provides access to the configuration dialogs and some
additional functions.
Access:
► Touch and hold a spot in the power analysis diagram for at least 1 second to
access the context- sensitive menu.
Using Power Sensors