Rohde & Schwarz SMAB-B92 - How to Save a Hardcopy of the Display

File and Data Management
R&S
®
SMA100B
315User Manual 1178.3834.02 ─ 05
10.10.2 How to Save a Hardcopy of the Display
1. Select "System Config > Setup > User Interface > Hardcopy".
2. To define the output format, select "Format > JPG".
3. To enable the instrument to create output filenames, select "Automatic Naming >
On".
4. Select "Options...".
5. In the "Hardcopy Options" dialog:
a) To change the default directory the file is saved in, select "Automatic Naming
Settings > Path" and define a path and a filename. For example, select the
default directory /var/user.
b) If necessary, disable or change some of the parameters in the "Automatic Nam-
ing Settings".
c) Close the "Hardcopy Options" dialog.
6. In the "Hardcopy" dialog, select "Save".
The instrument saves a hardcopy of the current instrument display as a *.jpg file.
The filename is automatically created.
7. To print the hardcopy, connect the instrument to a LAN and:
a) Transfer the file to a remote computer as described in Chapter 10.9, "How to
Transfer Files from and to the Instrument", on page 305.
b) On the remote computer, navigate through the file system.
Creating Screenshots of Current Settings