Rohde & Schwarz SMAB-B92 - Automatic Naming

Remote Control Commands
R&S
®
SMA100B
441User Manual 1178.3834.02 ─ 05
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
Example: See Example "Store a hard copy of the display" on page 438
Usage: Event
Manual operation: See "Save" on page 312
13.11.2 Automatic Naming
Use the following commands to automatically assign a file name.
:HCOPy:FILE[:NAME]:AUTO?.........................................................................................441
:HCOPy:FILE[:NAME]:AUTO:DIRectory........................................................................... 441
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar................................................................. 442
:HCOPy:FILE[:NAME]:AUTO:FILE?................................................................................. 442
:HCOPy:FILE[:NAME]:AUTO:STATe.................................................................................442
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe................................................................442
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe...........................................................442
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................. 442
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?..................................................................443
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix..................................................................... 443
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe........................................................... 443
:HCOPy:FILE[:NAME]:AUTO?
Queries path and file name of the hardcopy file, if you have enabled Automatic Nam-
ing.
Return values:
<Auto> string
Example: See Example "Store a hard copy of the display" on page 438
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
Determines the path to save the hard copy, if you have enabled Automatic Naming.
If the directory does not yet exist, the instrument automatically creates a new directory,
using the instrument name and /var/user/ by default.
Parameters:
<Directory> string
*RST: /var/user/
Example: See Example "Store a hard copy of the display" on page 438
Manual operation: See "Path..." on page 314
HCOPy Subsystem