Rohde & Schwarz SMAB-B92 - General Settings; ILS Configuration and Settings

Avionic Standards
R&S
®
SMA100B
124User Manual 1178.3834.02 ─ 05
Symbol Space
Requires "Time Schema > User".
Sets the length of the Morse code symbol space.
Remote command:
[:SOURce<hw>]:VOR:COMid:SYMBol on page 578
Letter Space
Requires "Time Schema > User".
Sets the length of a Morse code letter space.
Remote command:
[:SOURce<hw>]:VOR:COMid:LETTer on page 577
5.4 ILS Configuration and Settings
Option: R&S SMAB-K25
Access:
► Select "Modulation > Avionic Standards > ILS".
The remote commands required to define ILS settings are described in Chap-
ter 13.16.2.4, "SOURce:ILS Subsystem", on page 551.
Settings
● General Settings................................................................................................... 124
● ILS Glide Slope Settings....................................................................................... 127
● ILS Localizer Settings........................................................................................... 134
● ILS Marker Beacons Settings................................................................................143
5.4.1 General Settings
This chapter comprises general settings, which are common for all ILS components.
ILS Configuration and Settings