General Instrument Functions
R&S
®
SMA100B
330User Manual 1178.3834.02 ─ 05
Installed License Keys
Access: select "System Config > Setup > Instrument Assembly > Manage License
Keys > Installed License Keys".
Comprises information on the installed options.
Show Inactive ← Installed License Keys
Enables the display of the inactive (expired) licenses in the Installed License Keys
Table.
Show Deactivated ← Installed License Keys
Enables the display of the deactivated licenses in the Installed License Keys Table.
See How to Move a Portable License for information on how to activate deactivated
licenses.
Installed License Keys Table ← Installed License Keys
Shows information on the currently installed options.
"Export License Key to File"
Opens a dialog to save the generated license key file. This file is
required during the unregistration process.
If you have a portable unregistered option, you can register it later on
another instrument (see How to Move a Portable License).
"Option"
Displays the option short designation.
Tip: Open the Hardware Options/Software Options dialog to retrieve
more information about the installed options.
"License Count"
Displays the number of the licenses for the selected option key.
"License Type"
Displays the type of license.
A license type determines the common qualification application dura-
tion and the portability of a license. The following license types are
provided: evaluation, permanent, portable, quantified, time-controlled
with a duration of 1, 3, 6 or 12 months. A license can also be deacti-
vated or expired.
For time limited licenses, the left time of applicability is displayed too.
"Registrations"
(reserved for future use)
11.3.2 How to Move a Portable License
This example is intended to explain how to perform the required steps at the instru-
ment.
Use a USB flash drive to transfer the license key files between the instruments and the
browser.
Managing Licenses and License Keys
To Next Page
Loading...
