Rohde & Schwarz SMAB-B92 - How to Display All Saved Files; How to Map a Network Folder

File and Data Management
R&S
®
SMA100B
302User Manual 1178.3834.02 ─ 05
In the directory tree, a mapped network folder is indicated as /shares/
<"Local Folder">.
User Name
Enter a user name of a user that has the permission to access the selected network
folder.
Password
Enter the password of the selected user.
Reconnect at Startup
Enables reconnecting every time you start up the instrument.
Connect
Triggers the instrument to prove the credential and to map (i.e. connect) the selected
network folder or computer to the instrument.
You can map up to 10 network folders.
Change
Applies the changes.
Disconnect
Disconnects the network drive.
10.8.3 How to Display All Saved Files
To display all files on the internal memory
1. Select "System Config > Save/Recall" > "File Manager".
2. Navigate to /var/user/.
To display all files on a connected USB flash drive
1. Select "System Config > Save/Recall" > "File Manager".
2. Navigate to /usb/.
To display all files in the volatile memory
1. Select "System Config > Save/Recall" > "File Manager".
2. Navigate to /var/volatile/.
10.8.4 How to Map a Network Folder
Possibly you would like to transfer instrument or user settings to another
R&S SMA100B, distribute waveform files to several instruments or you have to access
Using the File Manager