Getting Started
R&S
®
SMA100B
59User Manual 1178.3834.02 ─ 05
Navigating in the table of contents and in the help topics
1. To move through the displayed contents entries, tap on an entry and scroll or use a
connected mouse or the [Up/Down] keys.
Entries with a plus sign contain further entries.
2. To display a help topic, tap on the topic name or double click on the topic name or
press the [Enter] key.
3. To follow a cross-reference, tap on the link text.
4. To return to the previous page, select "Back".
This function scrolls back all steps you have performed before.
5. Use the "scroll bars" to shift the visible section of content shown.
6. To maximize the "Topics" area, tap the "Hide Contents Tree" button to hide the con-
tents tree.
Using the index
1. Select the "Index" button.
2. Enter the first characters of the topic you are interested in.
The entries starting with these characters are displayed.
3. Tap on the index entry.
The corresponding help topic is displayed.
2.4.7 Remote Control
In addition to working with the R&S SMA100B interactively, located directly at the
instrument, it is also possible to operate and control it from a remote PC.
The R&S SMA100B supports various methods for remote control:
●
Connecting the instrument to a (LAN) network (see Chapter 2.1.3, "Setting Up a
Network (LAN) Connection", on page 28)
●
Using the LXI browser interface in a LAN network
●
Connecting a PC via the IEC-bus (IEEE 488) interface
●
Remote control via the USB interface
For remote control over LAN or USB, you can use the R&S VISA (Virtual Instrument
Software Architecture) library provided for download at the Rohde & Schwarz website
http://www.rohde-schwarz.com/rsvisa.
How to configure the remote control interfaces is described in Chapter 12, "Network
Operation and Remote Control", on page 346.
Instrument Control
To Next Page
Loading...
