Avionic Standards
R&S
®
SMA100B
151User Manual 1178.3834.02 ─ 05
5.5.2 COM/ID Settings
Access:
► Select "ADF > COM/ID".
This dialog comprises COM/ID signal settings related to the ADF signal.
Settings
COM/ID State..............................................................................................................151
Code............................................................................................................................151
Period..........................................................................................................................152
Frequency................................................................................................................... 152
Depth...........................................................................................................................152
Time Schema.............................................................................................................. 152
Dot Length...................................................................................................................152
Dash Length ...............................................................................................................152
Symbol Space ............................................................................................................152
Letter Space ...............................................................................................................153
COM/ID State
Enables/disables the COM/ID signal.
Remote command:
[:SOURce<hw>]:ADF:COMid[:STATe] on page 551
Code
Sets the coding of the COM/ID signal by the international short name of the airport
(e.g. MUC for the Munich airport).
The COM/ID tone is sent according to the selected code, see Chapter D, "Morse Code
Settings", on page 740.
ADF Configuration and Settings
To Next Page
Loading...
