Network Operation and Remote Control
R&S
®
SMA100B
364User Manual 1178.3834.02 ─ 05
Set to Default
In "Mode > User Defined", resets the *IDN and *OPT strings.
Remote command:
:SYSTem:IDENtification:PRESet on page 668
IDN String
Indicates the identification string of the instrument when queried with the common
command *IDN?.
In addition to the preset values, you can define your own identification string so that
each generator uses an individual identification, like My_SigGen for instance, see
Mode .
Remote command:
*IDN? on page 407
:SYSTem:IRESponse on page 668
OPT String
Indicates the option string of the instrument as queried with common command *OPT?.
In Mode > "User Defined", you can define your own option string, additionally to the
automatically created one.
Remote command:
*OPT? on page 408
:SYSTem:ORESponse on page 669
12.4.6 Active Connections Settings
Access:
► Select "System Config > Remote Access > Active Connections".
Remote Access Settings
To Next Page
Loading...
