Analog Modulations
R&S
®
SMA100B
95User Manual 1178.3834.02 ─ 05
Where:
●
"Select ASCII Source": defines the file to be loaded (imported)
●
"Select ASCII Destination": selects the filename under that the loaded file is saved
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog? on page 623
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect on page 623
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog? on page 588
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 589
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 539
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 539
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
●
"Select ASCII Destination": defines the filename and the file path for the exported
file
Remote command:
[:SOURce<hw>]:LIST:DEXChange:SELect on page 624
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 590
[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect on page 540
Import / Export
Imports or exports the selected data list file, depending on the current mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:EXECute on page 623
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 589
[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute on page 540
4.4.4 Pulse Graph
Option: see Chapter 4.1, "Required Options", on page 73.
Access:
► Select "Modulation" > "Pulse Modulation > Pulse Graph".
The pulse graph is the graphical representation of the current pulse signal.
Modulation Settings
To Next Page
Loading...
