Rohde & Schwarz SMAB-B92 - Page 626

Remote Control Commands
R&S
®
SMA100B
624User Manual 1178.3834.02 ─ 05
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST: COMMa
Example: See Example "List mode data exchange" on page 614.
Manual operation: See "ASCII File Settings" on page 94
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal
<Decimal>
Sets "." (decimal point) or "," (comma) as the decimal separator used in the ASCII data
with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example: See Example "List mode data exchange" on page 614.
Manual operation: See "ASCII File Settings" on page 94
[:SOURce<hw>]:LIST:DEXChange:MODE <Mode>
Determines the import or export of a list.
Specify the source or destination file with the command [:SOURce<hw>]:LIST:
DEXChange:SELect.
Parameters:
<Mode> IMPort | EXPort
*RST: IMPort
Example: See Example "List mode data exchange" on page 614.
Manual operation: See " Mode " on page 94
[:SOURce<hw>]:LIST:DEXChange:SELect <Filename>
Selects the ASCII file for import or export, containing a list.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "List mode data exchange" on page 614.
Manual operation: See "Select Source/Select ASCII Destination" on page 95
SOURce Subsystem