Network Operation and Remote Control
R&S
®
SMA100B
398User Manual 1178.3834.02 ─ 05
12.16.2 Setting Up a Remote Operation from a Smart Device
The R&S SMA100B supports remote operation via VNC from a smart device (remote
client), like a tablet (tablet computer) or a smartphone. The smart device accesses the
instrument via WLAN, either by a suitable App, or an HTML5 web browser, that means
with embedded javascript.
There are several possibilities to establish a WLAN connection between the smart
device and the R&S SMA100B, which are, however, not all described here. This sec-
tion gives an example of how a network environment can be built up, and some essen-
tial configuration steps.
For comprehensive information on this topic refer to the application notes:
●
1MA216: Remote Operation of Windows Based Instruments with Apple iPad
●
7BM82: Apple iPad Remote Control of Broadcasting T&M Instruments
Example:
Figure 12-7: Example of a network configuration for remote operation with a smart device
As shown in the figure, the R&S SMA100B and the WLAN router are connected to the
LAN router. The smart device accesses the Rohde & Schwarz instrument via the
WLAN router.
Prerequisites
For this network configuration, the following prerequisites must be met:
●
The required equipment is:
– A LAN router
– A WLAN router (hot spot)
Required for accessing the R&S SMA100B
●
The smart device must be known and accepted in the network of the
R&S SMA100B.
How to Set Up Remote Operation via VNC
To Next Page
Loading...
