Rohde & Schwarz SMAB-B92 - Calibration Subsystem

Remote Control Commands
R&S
®
SMA100B
422User Manual 1178.3834.02 ─ 05
Setting parameters:
<savrcl_state_nr> Corresponds to the specific <number> defined with the *SAV
command, e.g. *SAV 4.
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Usage: Event
Manual operation: See "Save" on page 293
:MEMory:HFRee?
Returns the used and available memory in Kb.
Return values:
<TotalPhysMemKb> integer
Total physical memory.
<ApplicMemKb> integer
Application memory.
<HeapUsedKb> integer
Used heap memory.
<HeapAvailableKb> integer
Available heap memory.
Usage: Query only
13.6 CALibration Subsystem
The CALibration subsystem contains the commands needed for performing internal
adjustments. This procedure is triggered by the query commands.
Suffix <hw>
Suffix Value range Description
CALibration<hw>
[1] Optional suffix
Understanding the query response
●
0: error-free execution of the adjustments
●
1: indicates that an error occurred; the process has been canceled
:CALibration:ALL[:MEASure]?......................................................................................... 423
:CALibration<hw>:ALL:DATE?.........................................................................................423
:CALibration<hw>:ALL:INFormation?............................................................................... 423
:CALibration<hw>:ALL:TEMP?........................................................................................ 424
CALibration Subsystem