Analog Modulations
R&S
®
SMA100B
96User Manual 1178.3834.02 ─ 05
The height of the bars corresponds to the selected amplitude of the pulse signal.
File Name
Indicates the name of the pulse train data file.
To create or select a file, see "Pulse Train Data" on page 91.
Remote command:
[:SOURce<hw>]:PULM:TRAin:SELect on page 537
Zooming
You can zoom into the diagram to visualize the graph in more detail:
●
"Zoom Position": Sets the focus on the time axis where to enlarge the graph.
●
"Zoom In": Enlarges the graph at the selected position.
●
"Zoom Out" for the reverse operation.
Modulation Settings
To Next Page
Loading...
