Rohde & Schwarz SMAB-B92 - Page 152

Avionic Standards
R&S
®
SMA100B
150User Manual 1178.3834.02 ─ 05
Settings
State............................................................................................................................150
Set To Default..............................................................................................................150
Save/Recall.................................................................................................................150
State
Activates the avionic standard.
Activation of the standard deactivates a previously active avionic standard. The
"VOR/ILS > Carrier Frequency" setting is applied automatically to the "RF > "Fre-
quency" on page 65"/"Frequency" in the status bar.
Remote command:
<subsystem>:SETTing:STATe on page 547
Set To Default
Calls the default settings. The values of the main parameters are listed in the following
table.
Parameter Value
State Not affected by "Set to default"
Carrier Frequency Mode User Defined
Carrier Frequency 334.700000 MHz
Remote command:
<subsystem>:PRESet on page 546
Save/Recall
Accesses the "Save/Recall" dialog, that is the standard instrument function for saving
and recalling the complete dialog-related settings in a file. The provided navigation
possibilities in the dialog are self-explanatory.
The filename and the directory, in which the settings are stored, are user-definable; the
file extension is however predefined.
Remote command:
<subsystem>:SETTing:CATalog on page 546
<subsystem>:SETTing:DELete on page 546
<subsystem>:SETTing:LOAD on page 546
<subsystem>:SETTing:STORe on page 547
ADF Configuration and Settings