File and Data Management
R&S
®
SMA100B
314User Manual 1178.3834.02 ─ 05
Provided are the following settings:
Path... ← Hardcopy Options > Automatic Naming
Selects the directory.
Note: To select the destination path, specify also a filename. Otherwise an error mes-
sage is displayed and selection is canceled.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 441
Clear Path ← Hardcopy Options > Automatic Naming
Deletes all image files with extensions *.bmp, *.jpg, *.png and *.xmp in the direc-
tory set for automatic naming.
Before the command is executed, a warning message prompts you to confirm the dele-
tion of the files.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar on page 442
Prefix, Year, Month, Day ← Hardcopy Options > Automatic Naming
Determines the rules for "Automatic Naming".
Per default, the automatically generated filename is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>, where Y, M and D mean
year, month, Day; Number is the Current Auto Number.
You can activate or deactivate each component separately.
The "Resulting filename" indicates the current filename syntax.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix on page 443
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe on page 443
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe on page 442
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe on page 442
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe on page 442
Current Auto Number ← Hardcopy Options > Automatic Naming
Indicates the number which is used in the automatically generated filename.
Note: When initially switching on the instrument, the number is reset to the lowest pos-
sible value. Starting with number 0 the output directory is scanned for existing files. As
long as files with the same name are existing, the number is increased by 1. The num-
ber is automatically set so that the resulting filename is unique within the selected path.
The current number is not in the save/recall file but is temporarily stored within the
database. At the following save operation, the number is increased.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer? on page 443
Creating Screenshots of Current Settings
To Next Page
Loading...
