Rohde & Schwarz SMAB-B92 - Page 552

Remote Control Commands
R&S
®
SMA100B
550User Manual 1178.3834.02 ─ 05
Example: See Example "Configure and generate a ADF signal"
on page 542.
Manual operation: See "Dot Length" on page 152
[:SOURce<hw>]:ADF:COMid:FREQuency <Frequency>
Sets the frequency of the COM/ID signal.
Parameters:
<Frequency> float
Range: 0.1 to 20E3
Increment: 0.01
*RST: 1020
Example: See Example "Configure and generate a ADF signal"
on page 542.
Manual operation: See "Frequency" on page 152
[:SOURce<hw>]:ADF:COMid:LETTer <Letter>
Sets the length of a Morse code letter space.
Parameters:
<Letter> float
Range: 50E-3 to 1
Increment: 1E-4
*RST: 300E-3
Example: See Example "Configure and generate a ADF signal"
on page 542.
Manual operation: See " Letter Space " on page 153
[:SOURce<hw>]:ADF:COMid:PERiod <Period>
Sets the period of the COM/ID signal.
Parameters:
<Period> float
Range: 0 to 120
Increment: 1E-3
*RST: 9
Example: See Example "Configure and generate a ADF signal"
on page 542.
Manual operation: See "Period" on page 152
SOURce Subsystem