10. Check how the two shapes peel o.
• Two shapes are peeled o together/backing paper is also cut
Press [◀] to select "YES".
• Two shapes are peeled o separately
Press [▶] to select "DONE".
CONTINUE ADJ.?
YES [DONE]
11. Press [ENTER] to conrm your entry.
• If you select "YES", the test paern is cut again. Go back to step 12 and perform the seng again.
• If you select "DONE", proceed to step 7.Correct the misalignment of the prinng and cung posions.(P. 103).
Printing and Cutting Output
102 3. Printing and Cutting Method
To Next Page
Loading...
