Roland TrueVIS VG2-540 - Page 239

2. Clean the print heads.
Procedure
1. Open the front cover.
2. Open the le cover.
3.
Remove the cut rail.
4. Move the print-head carriage to the posion where the cut rail was present.
Move the print-head carriage by hand.
CAUTION
When moving the print-head carriage by hand, be sure to hold the specied posi-
on.
Moving it by holding posions other than that specied may deform and damage the cover.
: Posion to hold with your hand
Manual Cleaning
238 2. Regular maintenance