• There may be extra middle pinch rollers depending on the width of the media being used. Move the extra middle pinch
rollers to posions where no grit paerns are present. Where no grit paerns are present, the middle pinch rollers will not
come down.
4. Straighten the media.
Align the media with the line indicated with the arrow in the following gure.
5. Lower the loading lever (front).
The media is held in place.
6. Line up the edges of the media with the centers of the holes of the media clamps (le and right).
Setup of Media
2. Basic Operations 45
To Next Page
Loading...
