Network
Test
You
can test or confirm the network connection status after setting up the network.
1.
Press the MENU button to display the menu.
Press the
A or T button to select "Setup", then press the ENTER
G'
button.
2.
Press the A or T button to select "Wireless Network Setup", then press the
ENTER
G'
button.
3.
Press the A or T button to select "Network Test", then press the ENTER
G'
button.
~ The current network settings will appear.
~ If no "Access Point Select"
is
set
up,
the test cannot
be
completed. (See
page 124)
Press the EXIT button to exit.
When unable
to
connect
to
a wireless network
1.
Your
TV
may fail to locate an AP that is configured as a private SSID type.
In
this case, please change the AP settings and try again.
2.
If your Internet service provider hasregistered the MAC address
of
the
device used to connect to the .Internet for the first time and authenticates
the MAC address each time
youconnectto
the Internet, your
TV
may not
be able to connect to the Internet as the
MAC
address differs from that
of
the device (PC) used to connect to the Internet the first time. In this case,
ask your Internet service provider
about
the procedures to connect devices
other than your
PC
(such
as
yourTV)
to the Internet.
If you cannot connect to the Internet even if you have followed the procedures
of yourlnternet service provider, please contact 1-800-SAMSUNG.
To Next Page
Loading...
