Samsung 950 - Page 39

Setting the Auto Motion Plus 120Hz
Removes drag from fast scenes with a lot of movement to provide a clearer
picture.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 33)
2. Press the A or T button to select "Auto Motion Plus 120Hz", then press the
ENTER G button.
3. Press the A or T button to select "Off', "Low", "Medium", "High" or "Demo",
then press the ENTER G button.
• Off: Switches Auto Motion Plus 120Hz off.
• Low: Sets Auto Motion Plus 120Hz to minimum.
• Medium: Sets Auto Motion Plus 120Hz to medium.
• High: Sets Auto Motion Plus 120Hz to maximum.
• Demo: Displays the difference between Auto Motion Plus 120Hz
on and
off modes. The screen after applying "Auto Motion Plus 120Hz" appears
on the left.
Press the EXIT button to exit.
> If you enable "Auto Motion Plus 120Hz", noise may appear on the
screen. If this occurs, set "Auto Motion Plus 120Hz" to "Off'.
"'" When "Smart LED"
is set to "Demo", the "Demo" option for "Auto Motion
Plus 120Hz" will not
be available.
Setting the Smart LED
Controls LED backlight to maximize picture clarity.
1. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 33)
2. Press the A or T button to select "Smart LED", then press the ENTER G
button.
3. Press the A or T button to select "Off', "On" or "Demo", then press the
ENTER G button.
• Off: Switches off the Smart LED mode.
• On: Switches on the Smart LED mode.
• Demo: Displays the difference between "Smart LED"
on and off modes.
The screen after applying "Smart LED" appears
on the left.
Press the EXIT button to exit.
"'" When "Auto Motion Plus 120Hz"
is set to "Demo", the "Demo" option for
"Smart LED" will not
be available.