SBC PCD1 Series User Manual

Saia-Burgess Controls AG
Manual Manual PCD 1 / PCD 2 Series │ Document 26 / 737 EN22 │ 2013-11-26
Content
0-3
0
3.25 Resetting the outputs on STOP or HALT (PCD2 only) .................................... 3-70
3.26 Presence/voltage monitoring for expansion unit (PCD2 only) ........................ 3-71
4 Saia PCD
®
Classic communication interfaces
4.1 General informations ...................................................................................... 4-1
4.1.1 Outphased interface modules .................................................................... 4-1
4.1.2 SBC S-Net .................................................................................................. 4-2
4.2 SummaryofPCD1 / PCD2onboardinterfaces ................................................ 4-3
4.3 Summary of PCD1 plug-in interface modules ................................................. 4-4
4.4 Summary of PCD2 plug-in interface modules ................................................. 4-5
4.5 Onboard interfaces ......................................................................................... 4-6
4.5.1 PGUconnection(PORT# 0,PCD1andPCD2)(RS-232)forconnectingpro-
gramming devices ...................................................................................... 4-6
4.5.2 PGUconnection(PORT# 0,PCD1andPCD2)(RS-232)
as communication interface ........................................................................ 4-7
4.5.3 PGUconnection(PORT# 0,onlyonPCD2.M1x0)(RS-485)
as communication interface ........................................................................ 4-8
4.5.4 RS-485 communicationinterfacePORT# 1,onlyonPCD1.M110 .............. 4-9
4.5.5 RS-485communiactioninterfacePORT# 6,onlyonPCD2.M480 ............. 4-10
4.5.6 USB interface as PGU interface. on PCD2.M480 ...................................... 4-11
4.5.7 ProS-NetonPCD2.M480 ........................................................................ 4-12
4.6 Plug-in interfaces modules: Socket A .............................................................. 4-13
4.6.1 RS-485 / 422withPCD7.F110,Port#1(withPCD1.M110hard-wired) ....... 4-13
4.6.2 RS-232 with PCD7.F120 (suitable for modem), Port #1
(without PCD1.M110) ................................................................................. 4-15
4.6.3 RS-232 with PCD7.F121, Port #1 (without PCD1.M110) ............................ 4-16
4.6.4 Current loop with PCD7.F130, Port #1 (without PCD1.M110) .................... 4-17
4.6.5 RS-485 with PCD7.F150, Port #1 (without PCD1.M110) ............................ 4-19
4.6.6 MP-Bus with PCD7.F180, Port #1 (without PCD1.M110) ........................... 4-20
4.6.7 Modem communication .............................................................................. 4-22
4.7 Serial interfaces: socket B(1) or B2 ............................................................... 4-23
4.7.1 RS-485 with PCD2.F520 (PCD2 only) ...................................................... 4-23
4.7.2 RS-422 with PCD2.F520 ............................................................................ 4-25
4.7.3 RS-232withPCD2.F520 / F522 .................................................................. 4-27
4.7.4 RS-232 full with PCD2.F522 (suitable for modem) .................................... 4-30
4.8 EthernetTCP / IP ............................................................................................. 4-32
4.9 Probus ........................................................................................................... 4-33
4.9.1 ProbusDPMaster,modulePCD7.F750 ................................................... 4-34
4.9.2 ProbusDPSlave,modulePCD7.F77x ..................................................... 4-36
4.9.4 ProbusFMS,modulePCD7.F700 ............................................................ 4-38
4.10 LonWorks
®
(freelycongurableLONnodes) .................................................. 4-40

SBC PCD1 Series Specifications

General

Brand	SBC
Model	PCD1 Series
Category	Controller
Language	English