Chapter 6: Using the Background Menu
Utilities Menu
118 Scantron OpScan 4ES and iNSIGHT 4ES Scanners
•Initiate Code = 11
• Positive = 11
• Negative = 1A
•X-On = FF
• X-Off = FF
•Start = 72
•Stop = 0E
•Release = 12
• Select Stacker = 1B
•Download = 1C
• Runtime = 1D
• Status = 73
•Scanner Ctrl = 65
• Print Position = 31
• Print Data = 32
•Display Data = 07
• End of Info = 04
• End of Batch = FF
•OCR = 1E
Press Next to skip this function and advance to the
next menu item.
Press Set to set the communications parameters to
the default configuration shown above.
A Comm Config Complete message will display. Press
Quit to complete communications configuration and
to exit this submenu.
To Next Page
Loading...