Chapter 4: Scanner Modes
Scantron Score Emulation Mode
Operator’s Guide 69
For Multiple Key Versions (on select forms):
Mark the Key
1 Mark the key marking rows as you would nor-
mally for a single or two sided key (see above).
2 Locate the version ID area on the test form.
3 Mark one letter per key, so that each key has a
unique identifier.
4 Ensure that each student test form is marked
with the appropriate key identifier before scor-
ing.
Score the Tests
1Press Start.
2 Load the tests and keys into the hopper with
the keys on top (so they will scan first).
3 (optional) Feed item analysis forms by follow-
ing the instructions on the form and on the
screen.
4 When finished feeding forms, press End.
NOTE: If scanning to software (for example,
Remark Classic OMR) press Save to transfer
the data to the computer before pressing End.
To Next Page
Loading...