SensAR: Flash save failed
SensAR: inconsistent addresses
Unable to read motor nameplate data
Unable to set when MTPMODE>0
Unable to set when COMMODE>0
POSCONTROLMODE is not supported
Unable to publish when SFBMODE>0
HDTUNE profile is not trapezoidal
This feedback is not supported
Feedback returns too much data
SensAR: internal requirement error
SensAR drive acquisition timeout
SensAR address out of range
Autotuning activation failed
Homing failed. If ILIM=0, it cannot be homed.
Communication feedback default value not defined
Feedback memory is not partitioned
Cannot be changed in modulo mode
EnDat stamp value does not match
EnDat2.X is not supported
MENCRES of this drive is too high
HDTUNE distance is not equal
Flash memory failed to store data
Flash memory failed to read data.
CANopen: object index not found
CANopen: object subindex not found
CANopen: wrong object size
To Next Page
Loading...
