Operating Instructions Chapter 10
CLV 480 Bar Code Scanner
8 010 080/O824/10-02-2005 © SICK AG · Division Auto Ident · Germany · All rights reserved 10-35
Appendix
10.6.5 Functions
The "CLV-Setup" program features (version V 4.0) the following functions to carry out:
• Uploading the default parameter set from the database of CLV-Setup
• Automatic communication attempt with the CLV when the program is started
• Automatic software compatibility check in the CLV
• Uploading and displaying parameter set stored in the CLV
• Changing the parameter/parameter values on the tabs
• CLV Assistant for simplified parameterization (not for CLV 480)
• Downloading the changes to the parameter set in the CLV
• Saving the changes to the parameter set as a configuration file "*.scl"
• Printing the configuration files
• Exporting the configuration files in RTF format
• Exporting the command strings contained in the profile bar codes in ASCII format
• Printing the parameter set in the form of profile bar codes (not for CLV 480)
• Organizing logically serveral scanners in projects
• Online access to the CLV via a Terminal Emulator (select operating mode, start
operating functions, log file for communication between the CLV and CLV-Setup,
extended Terminal mode, e. g. for displaying CLV messages)
• AutoBaud Detect for automatic communication setup with the CLV
• Selecting the COM port of the PC for adapting the data transfer parameters
• Monitoring the data communication of the CLV host interface
• Selecting language setting
• Selecting units of measure
• Displaying the last 10 configuration files that were processed
• Saving the CLV type that was selected last
• Automatic storage confirmation prompt when changes are made to the configuration file
• Wizards for individual functions
• CLV 490 only: I/O monitoring
• Setting switches for starting the program (in the "CLVmain.ini" file)
• Hot keys [F keys] for important functions (using the program without a mouse)
• Starting program with SCL file as argument
• Macro player for recording and playing a macro file
• Context-sensitive help via the [F1] key
10.6.6 Hot keys
[F1] Start "CLV-Setup Help“ online
[F2] Open dialog box to execute device functions
[F3] Upload complete set of parameters from CLV
[F4] Download complete set of parameters to CLV
[F5] Open configuration file
[F6] Save configuration file
[F7] Load default setting of CLV from CLV-Setup database
[F8] Start AutoBaud Detect
[F9] Load operating data from CLV to be displayed and reset
To Next Page
Loading...
