Operating Instructions
CLV 480 Bar Code Scanner
8 010 080/O824/10-02-2005 © SICK AG · Division Auto Ident · Germany · All rights reserved I-3
Quick Finder
CLV 480 Bar Code Scanner
Quick Finder
• What is delivered with the device
– Chapter 3.1.1 Scope of delivery, Page 3-1
• CAUTION!
– Chapter 2 Safety information, Page 2-1
• Mounting the device at the reading station
– Chapter 4 Installation, Page 4-1
• Connecting the device
– Chapter 5 Electrical installation, Page 5-1
• Overview of the device and its functions
– Chapter 3 Product description, Page 3-1
– Chapter 6.2 Default settings, Page 6-1
– Chapter 6.5 Operating modes and outputing the reading result, Page 6-25
– Chapter 9 Technical data, Page 9-1
– Chapter 10.3 Installing and operating the external parameter memory, Page 10-22
• Starting the device with the default settings
– Chapter 6.3 Quick start, Page 6-3
• Installing the "CLV-Setup" program
– Chapter 10.6 Installing and operating the "CLV-Setup" program, Page 10-29
• Adapting the device to the reading application
– Chapter 6.4 Configuring (parameterization) the CLV, Page 6-5
• Troubleshooting
– Chapter 8 Troubleshooting, Page 8-1
• Finding information
– Table of contents, Page I -5
– Index, Page 10 -68
To Next Page
Loading...
