SICK CLV 480 - Operating modes and outputing the reading result; Reading mode (standard operating mode)

To Next Page

To Previous Page

Operating Instructions Chapter 6

CLV 480 Bar Code Scanner

Operation

6.5 Operating modes and outputing the reading result

The following CLV operating modes/functions (and more) can be selected in CLV-Setup:

Standard operating mode:

• Reading mode

For setup:

• Percentage evaluation

• Adjusting mode

For adapting the device to the application at hand:

• Configuring (parameterizing ) the CLV.

See Chapter 6.4.1 Configuring the CLV via the user interface of CLV-Setup, Page 6-5

• Show CP-limits

For monitoring purposes/trouble shooting:

• I/O monitor in incremental pulse

• Display and edit operating data

• Reading diagnosis

• Monitor host interface

• Auxiliary input

• Self-test

6.5.1 Reading mode (standard operating mode)

The CLV performs a self-test after it has been switched on. It switches to Reading mode

("Device Ready" LED lights up). In the default setting the "Sensor" switching input is the (ex

ternal) trigger source of the reading pulse. The reading result is output by the CLV at the end

of the reading pulse via the host interface (default setting) and terminal interface.

Depending of the configuration, the "Result 1" to "Result 4" switching outputs become live

for the predefined pulse length when defined events occur during the reading process (e. g.

Good Read).

The reading result of the terminal interface can be displayed in the CLV-Setup Terminal

Emulator. The CLV terminal interface must be set to the R

EADING DIAGNOSIS mode for this pur-

pose. This mode is selected for the default setting. The reading result of the terminal inter-

face has a fixed, invariable format.

The Reading mode can be called up by choosing VIEW in the menu bar or via the Terminal

Emulator.

Line scanner with oscillating mirror:

In the Reading mode the CLV deflects (by default) the scan line about the position CW = 50

at a frequency of 1

Hz and a maximum angle of ±20°. 50 CW corresponds to an angle of

deflection of 105

°.

Related product manuals