What causes a temperature error in SICK Scanner?
If the Safety laser scanner’s operating temperature has exceeded or fallen below the permitted range, check whether the safety laser scanner is being operated in accordance with the permissible ambient conditions.
What to do when SICK Scanner warnings exceed tolerance time?
If the combination of multiple warnings has resulted in a fault because the tolerance time of 1 s has been exceeded, use Safety Designer to check what warnings exist.
General| Scanning angle | 275° |
|---|---|
| Protection class | IP65 |
| Number of protective fields | Up to 128 |
| Number of warning fields | Up to 128 |
| Ambient temperature range | -10°C to +50°C |
| Storage temperature range | -25°C to +70°C |
| Number of fields | 128 |
| Number of monitoring cases | 128 |
| Interfaces | Ethernet, USB, I/O |
| Number of field sets | 128 |
| Angular resolution | 0.1 ° |
| Supply voltage | 24 V DC |
| Operating voltage | 24 V DC |
| Housing material | Aluminum |
Details product ordering codes and part numbers.
Explains document purpose, scope, target audience, resources, and symbols.
Covers laser safety, general precautions, and hazardous radiation warnings.
Defines proper applications, unsuitable uses, and required personnel expertise.
Explains function, device overview, characteristics, field types, and examples.
Covers manufacturer/operator duties, assembly, and mounting considerations.
Details response time, contour monitoring, protection types, system integration, and electrical requirements.
Outlines requirements for thorough checks, regular inspections, and testing notes.
Covers safety, unpacking, mounting options, and fitting the system plug.
Highlights electrical safety, requirements, connection overview, and pin assignment.
Details Safety Designer, installation, projects, general requirements, and delivery state.
Explains user interface, groups, settings, identification, and application setup.
Covers monitoring planes, reference contour fields, fields, and field editor functions.
Details local I/Os, monitoring cases, simulation, transfer, and reports.
Covers safety, alignment, switching on, and checks during commissioning and modifications.
Details operating safety, thorough checks, LEDs, and buttons/display.
Covers safety during maintenance and regular cleaning of the optics cover.
Details replacing the optics cover and the safety laser scanner.
Details safety, diagnostic LEDs, display information, and fault displays.
Covers data recorder, event history, and message history for system analysis.
Provides guidance on the proper disposal of unusable devices according to regulations.
Details variant overview, version numbers, functional scope, and features.
Lists safety parameters, interfaces, electrical, mechanical, ambient, response times, and sensing ranges.
Covers compliance with EU directives and specifies relevant standards.
Provides a commissioning checklist and mounting methods for interference protection.
To Next Page
