SICK S3000 PROFINET IO

5.2.5 Mounting using the heavy duty mounting adapter
You can use the heavy duty mounting adapter to mount the device so that the scan
plane is be
tween 100 mm and 350 mm above the ground. The mounting adapter
allows you to align the device in 3 planes. The maximum adjustment angle is ± 5° or
± 9°.
≤ 350
≥ 100
5°5°
5°5°
9°9°
Figure 45: Mounting using heavy duty mounting adapter
5.2.6 Information label Notes on daily check
b
Af
ter mounting the device, affix the supplied Notes on daily check information
label.
NOTE
•
Use onl
y the information label in the language that the operators of the
machine can read and understand.
•
Affix the information label so that it is clearly visible to all operators during
operation of the system. After attaching additional objects and equipment,
the information label must not be concealed from view.
MOUNTING 5
8013291/ZA19/2019-11-14 | SICK O P E R A T I N G I N S T R U C T I O N S | S3000 PROFINET IO, S3000 PROFINET IO-OF
57
Subject to change without notice