Parameter Description
p1274 Bypass switch monitoring time (factory setting: 1000 ms)
Setting the monitoring time of the bypass contactor. Monitoring is deactivated for
p1274 = 0 ms.
[00] K1 inverter contactor
[01] K2 line contactor
For more information, see the parameter descriptions and function diagram 7035 in the List
Manual.
Advanced commissioning
6.36 Bypass
Converter with the CU230P-2 Control Units
356 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
To Next Page
Loading...
Need help?
General