4.2 Installing reactors, filters and braking resistors
Installing reactors, filters and braking resistors
The following supplementary components may be required depending on the Power Modules
and the particular application:
● Line reactors
● Filter
● Braking resistors
● Brake Relay
Installing these components is described in the documentation provided.
Installing
4.2 Installing reactors, filters and braking resistors
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE 63
To Next Page
Loading...
Need help?
General