Siemens CU240B-2 Operating Instructions

6.15.3 Selecting the technological unit of the technology controller
Options when selecting the technological unit
p0595 defines in which technological unit the input and output variables of the technology
controller are calculated, e.g. [bar], [m³/min] or [kg/h]. More information on this topic is provided
in the List Manual.
Reference variable
p0596 defines the reference variable of the technological unit for the technology controller.
Unit group
Parameters involved with p0595 belong to unit group 9_1.
More information on this topic is provided in the List Manual.
Overview of the manuals (Page 537)
Special features
You must optimize the technology controller after changing p0595 or p0596.
Additional technology controllers
You can set the technological unit for each additional technology controller.
Technological
unit
Reference variable for the
technological unit
Unit group
Additional technology controller 0 p11026 p11027 9_2
Additional technology controller 1 p11126 p11127 9_3
Additional technology controller 2 p11226 p11227 9_4
You will find more information in the List Manual.
6.15.4 Setting the motor standard, system of units and technology unit using STARTER
Precondition
STARTER must be in the offline mode to switch over the units.
Select the online mode or the offline mode us‐
ing the adjacent buttons.
(VWDEOLVKWKHRQOLQH
FRQQHFWLRQ
*RRIIOLQH
GLVFRQQHFW
STARTER indicates whether you change the settings online in the converter or offline in the
PC: / .
Advanced commissioning
6.15 Selecting physical units
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE 255

Siemens CU240B-2 Specifications

General

Brand	Siemens
Model	CU240B-2
Category	Inverter
Language	English