Wiring
4-22
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
4.4.4 Wiring the connectors for inputs and outputs
Connectors for digital inputs and outputs
You can connect digital inputs and outputs to the round, 5-pin M12 sockets on the
front of the basic/expansion modules. Alternatively, you can use 5-pin M12 coupler
plugs or Y connectors. Please refer to Appendix A for the order numbers.
Connectors for analog inputs and outputs
You connect analog inputs and outputs to the round, 5-pin M12 sockets on the
front of the expansion module. You use 4- or 5-pin M12 coupler plugs. You can
obtain further information on the connectors on request:
4-pin Outgoing cable unit PG 7 99-1429-814-04
4-pin Outgoing cable unit PG 9 99-1429-812-04
5-pin Outgoing cable unit PG 7 99-1437-814-05
5-pin Outgoing cable unit PG 9 99-1437-812-05
Address for ordering:
Franz Binder GmbH + Co.
Elektrische Bauelemente KG
Rötelstraße 27
D-74172 Neckarsulm
To Next Page
Loading...
