Siemens SIMATIC ET 200X - Analog Value Representation for the Measuring Ranges of the Analog Inputs and Outputs (SIMATIC S7 Format)

Technical Specifications
7-88
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
7.21.3 Analog value representation for the measuring ranges of the
analog inputs and outputs (SIMATIC S7 Format)
The tables in this chapter contain the digitized analog values for the measuring
ranges of the expansion modules with analog inputs and outputs.
The binary representation of the analog values is always the same, so these tables
only compare the measuring ranges and the units.